LG WM22VV2S6B Manual Del Propietário página 58

Adjusting and Levelling the Feet
When installing the appliance, the appliance
should be aligned and perfectly level.
• If the appliance is not aligned and level
properly, the appliance may be damaged or
may not operate properly.
1
Turn the adjustable feet as required if the floor
is uneven.
• Do not insert pieces of wood etc. under the
feet.
• Make sure that all four feet should be stable
and resting on the floor.
2
Check if the appliance is perfectly level using
a spirit level a.
14
3
Secure the adjusting feet with the lock nuts
b by turning counterclockwise against the
bottom of the appliance.
4
Check if all lock nuts at the bottom of the
appliance are secured properly.
NOTE
• Proper placement and levelling of the appliance
will ensure long, regular, and reliable operation.
• The appliance must be level and stand firmly
in position.
• It must not 'Seesaw' across corners under the
load.
• Do not let the feet of the appliance get wet.
Failure to do so may cause vibration or noise.
Using Anti-Slip Sheets
This feature is only available on some models.
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect levelling may cause malfunction through
noise and vibration. If this occurs, install the anti-
slip sheets under the levelling feet and adjust the
level.
1
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the levelling feet when placing the
appliance in the installation area.
EN