Making Hot Chocolate; Regular Cleaning And Maintenance - Mr Coffee Café Latte Manual Del Usuario

3. Easy to use controls.
a. Make sure the appliance is plugged in.
b. Push the selector switch up to the latte function.
c. Lower the on/off lever to turn the appliance on.
d. The power light will illuminate while the cycle is active and turn off when
complete.
4. Ready to serve.
a. Raise the on/off lever and remove the latte pitcher from the base.
b. Pour latte into serving glasses and spoon any additional foam desired to
complete your latte.

MAKING HOT CHOCOLATE

1. Add ingredients to the latte pitcher.
a. Remove the pitcher from its base and remove the lid by twisting counter
clockwise.
b. Add milk to the desired level marking single
c. Add any other ingredients per the recipe book.
d. Secure the lid onto the pitcher, by twisting clockwise, and place the pitcher
back onto the base with the pitcher handle facing out.
2. Easy to use controls.
a. Make sure the appliance is plugged in.
b. Push the selector switch down to the heat/froth function.
(NOTE: This will not activate the brewing feature during the cycle.)
c. Lower the on/off lever to turn the appliance on.
d. The power light will illuminate while the cycle is active and turn off when
complete.
3. Easy to serve.
a. Raise the on/off lever and remove the latte pitcher from the base.
b. Pour hot chocolate into serving glasses and spoon any additional foam desired
to complete your drink.
or double .
English 10
REGULAR CLEANING
AND MAINTENANCE
Minerals (calcium/limestone) found in water will leave deposits in your latte maker
and affect its performance. It's recommended that you remove the deposits using
vinegar or a coffee cleaning solution once a month or every 30–40 cycles.
1. Pour 1 cup or 8 fluid ounces of undiluted, white household vinegar into the
water reservoir.
NOTE: If using a cleaning solution please follow the package instructions.
2. Place an empty paper filter or permanent filter into the brew basket and secure
the brew basket into place.
3. Place the latte pitcher onto the base with the lid assembled and water filled to
the single serving level.
4. Lower the Power Lever to turn the appliance on.
5. Allow the Latte Maker to run the complete cycle and allow it to shut off
automatically.
6. Lift the Power Lever to allow clearance for removing the latte pitcher.
7. Discard the cleaning solution and rinse the latte pitcher with clean water.
8. Fill the water reservoir with 1 cup / 8 ounces of fresh, clean water.
9. Assemble and place the latte pitcher back onto the base with fresh water filled
to the single serving marking.
10. Discard the paper filter from the brew basket or thoroughly rinse the permanent
filter that was used during the brew cycle.
11. Begin brewing and allow the full brew cycle to complete.
12. Repeat steps 7–11 one more time before making your next latte.
English 11