Maytag Precision Touch Control 700 Guía De Uso Y Cuidado página 7

Surface Cooking
Operating During a
Power Failure
CAUTION
When lighting the surface burners, be sure all of the
controls are in the OFF position. Strike the match first and
hold it in position before turning the knob to LITE.
1. Hold a lighted match to the desired surface burner.
2. Push in and turn the control knob slowly to LITE.
3. Adjust the flame to the desired level.
Cooktop
To prevent the cooktop from discoloring or
staining:
•
Clean cooktop after each use.
•
Wipe acidic or sugary spills as soon as the cooktop has
cooled as these spills may discolor the
porcelain.
Unlike a range with standard gas burners,
this cooktop does not lift-up nor is it
removable. Do not attempt to lift the
cooktop for any reason.
Sealed Gas Burners
The sealed burners of your range are secured to the cooktop
and are not designed to be removed. Since the burners are
sealed into the cooktop, boilovers or spills will not seep
underneath the cooktop.
However, the burner should be cleaned after each use. The
head portion of the burner is easily removed for cleaning.
(See page 20 for cleaning directions.)
The burner heads must be correctly placed on the burner
base for proper operation of the burner.
Power Boost Burner*
There is one high speed burner on your
range, located in the right front
position. This burner offers higher
speed cooking that can be used to
quickly bring water to a boil and for
large-quantity cooking.
Simmer Burner
This burner is located in the center
position. The simmer burner offers a
lower BTU* flame for delicate sauces or
melting chocolate.
* BTU ratings will vary when using LP gas.
6