Display On/Off
To turn Display off:
Touch and hold the CLOCK Pad for three seconds.
The display will turn off and a beep sounds.
To operate the oven, press any key.
Then clock will be shown and the operation of all function key will be same as in the normal
mode.
But if there is no operation within 10 seconds in clear mode, all the contents of display will
disappear.
To turn Display on:
Touch and hold the CLOCK Pad for three seconds.
When the display is on and a beep sounds.
The oven is again available for normal use.
Using the Vent Fan
You can control the 2-speed fan by touching the VENT FAN Pad.
1. Touch the VENT FAN Pad once for HIGH speed.
The Display will show "Hi".
2. Touch the VENT FAN Pad twice for LOW speed.
The Display will show "Lo".
3. Touch the VENT FAN Pad three times for turning vent fan off.
The Display will show "OFF".
Using the Cooktop Light
You can control the light by touching the LIGHT Pad.
1. Touch the LIGHT Pad once to turn the cooktop light on.
The display will show "On".
2. Touch the LIGHT Pad twice to turn the light off.
The display will show "OFF".
Note: If there is no user input for 10 hours, cooktop light and vent fan will turn off automatically
to save energy.
EN-22