7
Adjust the strap.
Adjust the strap by using the adjuster.
Insert the cord
To remove the cradle
1
Press the ridges to remove the cradle cable
from the cradle.
2
Loosen the strap from the adjuster.
3
Take the hoop of the strap off from the
cradle.
4
Turn the LOCK/RELEASE lever clockwise
by 90 degrees.
Adjuster
5
Pull the tab of the cradle for a few seconds in
the direction of the arrow marked in the
illustration below (), and then slowly
(over 3 to 5 seconds) remove the suction cup
().
Notes
• Pull the cradle by its tab when you remove
the suction cup from the dashboard.
• Doing any of the following may damage the
suction cup.
– press/pull the cradle by its tab in a
horizontal direction.
– insert a hard object (key, blade, finger,
etc.) between the suction cup and the
dashboard to remove the suction cup
from the dashboard.
• The suction cup may be damaged if it is
forcefully removed, or the cradle is forced in
a horizontal direction while still attached to
the dashboard, or put the pressure on the
cradle in the horizontal direction before
completely taking off the suction cup from
the dashboard.
• If the temperature of the surface of the
dashboard is low, for example, in winter or
when used in a cold region, removal of the
suction cup may be difficult.
Tab
Tab
13