English - Sharp MX-B350P Guia De Inicio Rapido

This manual explains basic procedures for using the machine, cautions for safe use of the machine, and information for
the administrator. Read this manual before using the machine. For detailed operating procedures and troubleshooting
information, see the manuals in PDF format.
CAUTIONS
Each instruction also covers the optional units used with these
products.
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
The equipment should be installed near an accessible socket
outlet for easy disconnection.
Please note
• Considerable care has been taken in preparing this manual.
If you have any comments or concerns about the manual,
please contact your dealer or nearest authorised service
representative.
• This product has undergone strict quality control and
inspection procedures. In the unlikely event that a defect or
other problem is discovered, please contact your dealer or
nearest authorised service representative.
• Aside from instances provided for by law, SHARP is not
responsible for failures occurring during the use of the
product or its options, or failures due to incorrect operation
of the product and its options, or other failures, or for any
damage that occurs due to use of the product.
Warning
• Reproduction, adaptation or translation of the contents of the
manual without prior written permission is prohibited, except
as allowed under copyright laws.
• All information in this manual is subject to change without
notice.
The display screens, messages, and key names shown in the
manual may differ from those on the actual machine due to
product improvements and modifications.
• This machine contains the software having modules
developed by Independent JPEG Group.
• Copyright© 1995-2007 Adobe Macromedia Software LLC.
All rights reserved.
Warranty
While every effort has been made to make this document as
accurate and helpful as possible, SHARP Corporation makes no
warranty of any kind with regard to its content. All information
included herein is subject to change without notice. SHARP is
not responsible for any loss or damages, direct or indirect,
arising from or related to the use of this operation manual.
© Copyright SHARP Corporation 2018. All rights reserved.
Reproduction, adaptation or translation without prior written
permission is prohibited, except as allowed under copyright laws.
Software License
The Software License will appear when you download the
*1
software or install the software from the CD-ROM
By downloading and using the software, you are agreeing to
the bound by the terms of the Software License.
*1 If the software is obtained from our website.
*2 If the "Software CD-ROM" is provided with the machine.
Wireless LAN
MX-B350P/MX-B350PE/MX-B450P/MX-B450PE:
Standard (Built-in type)
The communication range of wireless LAN may shorten or
communication may not be possible in some usage environments,
due to shielding materials, the installation location, the effects of
ambient radio noise, data transmission speed, and other factors.
Laser information
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Wave length
Pulse times
Output power
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC
60825-1 Edition 3-2014).
EMC (this machine and peripheral
devices)
WARNING:
Shielded interface cables must be used with this equipment
to maintain compliance with EMC regulations.
A Cable of 10 m or less is preferable.
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
*2
.

English

MX-B350P/MX-B350PE/MX-B450P/
MX-B450PE:
788 nm + 12 / -13 nm
MX-B350P/MX-B350PE:
Normal paper mode / Heavy paper mode =
14.03 μs ± 0.041 μs / 7 mm
MX-B450P/MX-B450PE:
Normal paper mode =
11.02 μs ± 0.032 μs / 7 mm
Heavy paper mode =
14.03 μs ± 0.041 μs / 7 mm
MX-B350P/MX-B350PE/MX-B450P/
MX-B450PE:
Max 0.6mW (LD1+LD2)
1