WMF 0416290011 Instrucciones De Uso página 12

* Compared to WMF LINEO table blender.
Confirmed by technikzuhause.de. Resource savings refer to material usage and
transportation volume.
Energy savings refer to the maximum power consumption at maximum filling
capacity.
Start-up
▪ Clean the glass jug (3), lid (2) and closing cap (1) before starting up the appli-
ance for the first time. Ensure that you do not injure yourself on the sharp
blade.
▪ Place the appliance on an even surface and position the glass jug (3) on the
drive unit (8).
▪ Add the ingredients to the jug (3) and close it with the lid (2) and the closing
cap (1).
Additional ingredients may be added by removing the closing cap (1), even
while the motor is running.
Note: Ensure that you do not exceed the maximum filling quantity of 0.8 l. If
you are using hot, very liquid or slightly foaming food (e.g. milk), we advise
using 0.5 l as the maximum filling quantity.
Note: Never operate the appliance empty.
▪ Start the appliance by turning the selector switch (8) to the right. Start at a
low speed and increase it if necessary.
To use the Pulse function, hold the selector switch (8) to the left on the Pulse
level. The motor will operate at maximum speed for as long as you keep the
selector switch (8) on the Pulse level.
▪ As soon as the desired result has been achieved, switch the selector switch (8)
to the Off position
Attention! Risk of injury! Always wait for the blade (2) to come to a
standstill before removing the lid. Do not reach into the appliance before
the mains plug has been unplugged. Completely empty the glass jug (3)
following use. Do not leave any liquid in the jug (3).
12
. Only then should you remove the jug (3).