Remote Controller - Beamz Sway LED Jellyball with laserand LED Organ Manual De Instrucciones

OPERATION
1. DC12V power input
2. ON/OFF Power switch
3. Microphone
4. Sound sensitivity
5. Mode 0-3 button
0: LED + Laser + Strobe (random show)
1: LED Show
2: Strobe show
3: Laser show
6. Sound switch:
Fast: Show 0-3 fast speed, LED indicator flickers
fast.
Slow: Show 0-3 slow speed, LED indicator
flickers slow.
Sound: Show 0-3 controlled by sound. LED
indicator flickers on the sound beat
7. Laser Keyswitch ON/OFF

REMOTE CONTROLLER

1. Standby
2. Show button 0-3:
Show 0: LED + Laser + Strobe (random show)
Show 1: LED show
Show 2: Strobe show
Show 3: Laser show
3. Show 0-3 fast speed; LED indicator flickers fast.
4. Show 0-3 slow speed; LED indicator flickers slow.
5. Show 0-3 controlled by sound; LED indicator flickers on the sound beat.
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding
can cause greater accumulation of dirt on the unit's optics.

Make sure the area below the installation place is free from unwanted persons during servicing

Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation

The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is
detected

In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.

The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
 Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every month. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!
5