Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
1.
Remove smaller top logs and set aside carefully.
2.
If using wax log, place wax log on grate between larger bot-
tom logs (see Figure 7). Follow manufacturer's instructions.
Note: Combustion air is needed for the fire log to burn prop-
erly. The rear log grate step can be adjusted to create more
space between the front and back log allowing more air around
the fire log.
3.
If using gelled-alcohol fuel, place 1 to 3 canisters on grate
between larger bottom logs (see Figure 8). Follow
manufacturer's instructions.
4.
Replace top logs roughly perpendicular to, and toward outside
of bottom logs (see Figure 5).
Note: When burning gelled-alcohol fuel, ensure the cross-over
logs do not come in contact with flames. This will cause soot.
Follow manufacturer's instructions.
5.
Ignite paper on wax log and allow to burn completely.
IMPORTANT: Damper must be fully open.
Figure 7 - Installing Wax Log (Follow Manufacturer's Instructions)
Figure 8 - Installing Gelled-Alcohol Fuel (Follow Manufacturer's
Instructions)
For more information, visit www.desatech.com
For more information, visit www.desatech.com
108649
CLEANING AND MAINTENANCE
ILLUSTRATED PARTS BREAKDOWN
CLEANING AND MAINTENANCE
• Keep the area around the log set clean and clear of debris.
• Occasionally, you may use a soft bristle brush to clean logs.
• Once every year a qualified agency or certified chimney sweep
should examine and clean the venting system of the fireplace.
• Empty ash pan after each use. Let product cool completely
before emptying ash pan.
ILLUSTRATED PARTS
BREAKDOWN
4
3
KEY
PART
NO.
NUMBER
1
108699-01
2
901630-01
3
108650-01
4
901713-01
5
901111-01
6
901102-01
7
901476-01
OPERATION
7
5
6
2
DESCRIPTION
QTY.
Grate
1
Grate Steps
2
Ash Pan
1
Front Log
1
Back Log
1
Top Log 1
1
Top Log 2
1
3 3
1
Tabla de contenido
