Operation - Elite CS1425 Manual De Usuario

6. Install the lock
This machine is equipped with a lock that prevents the cutting disc from being damaged by contact with the
ground and ensures operation.
INSTRUCTION AND OPERATION
1. Cut a workpiece
(1) Wait for the tool to find its maximum speed before starting to cut.
(2) When the cutting disc is in contact with the workpiece, lower the handle slightly to cut it.
(3) After cutting, raise the handle to return it to its original position.
(4) After completing the operation, turn off the switch to stop the rotation of the cutting disc. Then prepare
for the next operation.
(5) Never remove the workpiece while the cutting disc is rotating.
Secure the workpiece firmly in the fastener to prevent it from moving.
2. On / Off Switch
Push the button to turn on the switch and release it to turn it off. To improve continuous operation, press the
switch by pushing the button. To stop the operation, release the switch. When the switch is not released
there may be a fault with it.
Immediately turn off the machine to stop operation. Then replace the switch at the service center.
Press the green ON button and press the red OFF button.
10
www.ELITETOOLS.co
Keep Working