Amana AP125D Manual Del Usuario página 8

Your window kit has been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures
for certain type windows. Please refer to for minimum and maximum window openings.
Installation Instruction
• Air outlet intake on the indoor side should not be blocked by curtains or similar objects.
• The end of the air hose cannot be blocked by shutters or other similar objects.
• Do not bend the air hose when assembling: keep it straight.
• When appliance in cool or dry mode, condensation may concentrate in water box or chassis.
When the box is full, water full indicator lights up (red), and the LCD window shows the error
sign E. The appliance will stop running at the same time. Unplug the unit from the outlet, then pull
out the rubber plug in drain port located on the bottom of the appliance, drain the water into
a prepared container, or drain the water by moving the appliance to a suitable place.
Note: Water should be drained out when the water full light is on. Otherwise, the appliance
will not work.
• Select the best location for your air conditioner. It must be beside a window, door to the outside,
or French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20".
• Attach one end of each hose to the unit. They will snap in. Connect the other end of each hose to
the window kit that comes with the unit.
• Air outlet or intake cannot be blocked by protective grid or similar object.
• The distance between two ends of the air hose should be kept at 8" at least.
Note: It is not recommended to use only one hose. This will greatly reduce the cooling
capacity of the unit.
Fig. 3
English
(7)