Health O Meter 7630 Manual Del Usario página 11

2. Squeeze the bulb to increase pressure in the arm cuff. The display will show
the pressure reading within the cuff. Continue pumping until the pressure
reaches approximately 50~60 mmHg above your normal systolic pressure.
If the pressure in the cuff is not high enough, an upward arrow (
will display to remind you that you should continue pumping.
3. Sit still and wait for the cuff to deflate and measure your blood pressure.
It is important to remain still and quiet during measurement.
Any significant movement may affect measurement results.
4. When the monitor completes the measurement, it will automatically display
and store the systolic, diastolic, and pulse reading into memory. The last
60 measurement readings will be saved into memory.
The display will indicate a downward arrow (
air release valve above the bulb until all pressure in cuff is released.
5. Press the POWER button to turn the unit off. The unit will automatically
shut off after 1 minute if no buttons are pressed.
). Keep pressing the
11
)