General Maintenance & Cleaning; Environmental Protection - Evolution R185CCSL Instrucciones Originales

GENERAL MAINTENANCE & CLEANING
(20)
Note: All maintenance must be carried out with the machine
switched off and disconnected from the power supply.
• Check that all safety features and guards are operating
correctly on a regular basis. Only use this machine if all
guards/safety features are fully operational.
• All motor bearings in these machines are lubricated for life.
No further lubrication is required.
Use a clean, slightly damp cloth to clean the plastic parts of the
machine. Do not use solvents or similar products which could
damage the plastic parts.
Remove any dust or other contaminants from the lens cover of
the LED module.
WARNING: Do not attempt to clean by inserting pointed
objects through openings in the machines casings etc. The
machines air vents should be cleaned using compressed dry air.
Note: The operator should employ all necessary PPE when
using compressed dry air as a cleaning medium.

ENVIRONMENTAL PROTECTION

(21)
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
www.evolutionpowertools.com
20