Securing The Chimney; Installing The Cooking Components - Pit Boss PB820FB Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

6. SECURING THE CHIMNEY

Parts Required:
1
x
Chimney Gasket (#6)
1
x
Chimney (#7)
Screw (#A)
2
x
Locking Washer (#C)
2
x
2
x
Washer (#B)
Installation:
Locate the chimney opening on the side of the main barrel. From the
outside, secure the chimney and chimney gasket to the side panel
using two screws, locking washers, and washers. The screw will fasten
to the pre-mounted nut on the inside of the barrel.
NOTE: Ensure the chimney cap allows for air to escape.

7. INSTALLING THE COOKING COMPONENTS

Parts Required:
3
x
Cooking Grids (#2)
Upper Cooking Rack (#1)
1
x
Flame Broiler Main Plate (#5)
1
x
1
x
Flame Broiler Slider (#4)
Installation:
Insert the flame broiler main plate into the main grill. Rest the flame
broiler main plate on the built-in ledge (on the inside right) of the
main grill that directs grease towards the grease bucket. Slide the
entire piece to the left side, and the two slots on the flame broiler
main plate will fit into the rounded ledge above the burn pot. It will
sit slightly at a downward angle. Note illustration 7A.
NOTE: If the main plate is on the base of the barrel, it is installed incorrectly.
Place the flame broiler slider on top of the flame broiler main plate,
covering the slotted openings. Ensure the raised tab is on the left, to
easily adjust for direct or indirect flame when cooking. Note illustration
7B. Both flame broiler parts are lightly coated with oil to avoid rusting
when shipped.
NOTE: When the flame broiler slider is open, and direct flame is used
while cooking, do not leave the grill unattended for any period of time.
Place the cooking grids, side-by-side, on the grid ledge inside the main
grill. Place the upper cooking rack on the upper ledge inside the main
grill. The cooking rack will lock into place.
The unit is now completely assembled.
NOTE: To maintain the searing and grilling performance of your cooking
grids, regular care and maintenance Is required.
6
A
7A
7B
C
B
9
Tabla de contenido

Solución de problemas

loading

Tabla de contenido