ECOFOREST HV HIDROCOPPER 18 Manual De Instalación Y Mantenimiento página 38

w
Stainless steel hose clamp.
e
T of 135° with outlet.
y
Wooden ground.
u
Non flammable floor protection.
a
Isolated stainless steel flexible tube.
s
Rigid flexible pole adapter.
h
Minimum 200mm.
j
It must exceed roof height by 1 metre.
If the tube over 8 m in length, the next larger
k
size will be used.
4.28. Installing a fitted stove in a brickwork chimney can be done using flexible piping in its entirety, as indicated in
drawing 9. We must take special care when sealing the chimney and gas venting to avoid gas blowing back
during storms.
w
Stainless steel hose clamp.
e
T of 135° with outlet.
y
Wooden ground.
u
Non flammable floor protection.
a
Stainless steel flexible tube.
s
Rigid flexible pole adapter.
d
Anti blow-back seal.
h
Minimum 200mm.
j
It must exceed roof height by 1 metre.
If the tube over 8 m in length, the next larger
k
size will be used.
When installing a flexible tube for gas outlet be careful that this is not in contact or close to the circuit board
or combustible material.
TOP GAS OUTLET HIDROCOPPER 18 SLIM+
Figura 10
37
j
a
s
yu
Drawing 8
j
d
a
s
r
yu
e
Drawing 9
h
k
w
e
r
h
k
w