Makita BFT020F Manual De Instrucciones página 5

ENGLISH
1 Battery cartridge
2 Button
3 Red part
4 Indicator lamp
5 Capacity
6 Switch trigger
7 Reversing switch lever
8 Front lamp
SPECIFICATIONS
Model
Fastening Hard joint
torque
Soft joint
(N•m)
-1
No load speed (min )
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
ADDITIONAL SAFETY RULES FOR TOOL
1. Be aware that this tool is always in an operating
condition, because it does not have to be
plugged into an electrical outlet.
2. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring. Contact with a "live"
wire will also make exposed metal parts of the
tool "live" and shock the operator.
3. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
4. Hold the tool firmly.
Explanation of general view
9 LED indicator
10 Adjusting ring
11 Ring
12 Scale
13 Adjusting grip
14 Hole for adjusting grip
15 Yellow line
16 Compression spring
BFT020F BFT021F
0.5 – 2 0.5 – 2
0.5 – 2 0.5 – 2
540 320
200 x 65 x 251 mm
(with Battery Cartridge BH9020/BH9020A)
200 x 65 x 274 mm
(with Battery Cartridge BH9033/BH9033A)
(with Battery Cartridge BH9020/BH9020A)
(with Battery Cartridge BH9033/BH9033A)
ENB026-1
BFT040F BFT080F
1 – 4 3 – 8
1 – 3.5 3 – 6.5
950 540
1.3 kg
1.5 kg
D.C. 9.6 V
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS — This manual
contains important safety and operating instruc-
tions for battery charger.
2. Before using battery charger, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
3. CAUTION — To reduce risk of injury, charge only
MAKITA type rechargeable batteries. Other types
of batteries may burst causing personal injury
and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold
by the battery charger manufacturer may result
in a risk of fire, electric shock, or injury to per-
sons.
6. To reduce risk of damage to electric plug and
cord, pull by plug rather than cord when discon-
necting charger.
17 Bit
18 Sleeve
19 Range of fastening capacity
20 Revolution angle (°)
21 Torque (N•m)
22 Limit mark
23 Brush holder cap
24 Screwdriver
BFT122F BFT081F
5 – 12 3 – 8
5 – 10 3 – 7.5
320 700
200 x 71 x 242 mm
(with Battery Cartridge
BH1220C)
200 x 71 x 251 mm
(with Battery Cartridge
BH1233C)
1.5 kg
(with Battery Cartridge
BH1220C)
1.7 kg
(with Battery Cartridge
BH1233C)
D.C. 12 V
BFT123F
5 – 12
5 – 12
390
ENC002-3
5