G
Slide the canopy (B) up to the hanger bracket (A) matching
the L-slots on the canopy to the two screws (KK) on the
hanger bracket (A). Turn the canopy until it locks in place.
Reinstall the two previously-removed screws (KK), through
the canopy (B) into the hanger bracket (A).
Tighten all four screws (KK).
Insert the blades (C) into the side slots in the motor (B)
until the blades (C) click and lock in place.
G
B
G
B
KK
A
B
B
C
