You now have at your fingertips a valuable communications tool - a Vertex Standard
two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio will keep
you in constant touch with your colleagues for years to come, with negligible mainte-
nance down time.
Please take a few minutes to read this manual carefully. The information presented
here will allow you to derive maximum performance from your radio. After reading it,
keep the manual handy for quick reference, in case questions arise later on.
We're glad you joined the Vertex Standard team. Call on us any time, because our
business is communications. Let us help you get your message across.
There are no user-serviceable points inside this transceiver. All service jobs
must be referred to your Authorized Service Center or Network Administrator.
WARNING - DO NOT operate the VX-6000L/V/U radio when someone (by-
standers) outside the vehicle is within following range.
Safety Training information:
Antennas used for this transmitter must not exceed an antenna gain of 0 dBd.
The radio must be used in vehicle-mount configurations with a maximum oper-
ating duty factor not exceeding 50%, in typical Push-to-Talk configurations.
This radio is restricted to occupational use, work related operations only where
the radio operator must have the knowledge to control the exposure conditions
of its passengers and bystanders by maintaining the minimum separation dis-
tance of following range.
Failure to observe these restrictions will result in exceeding the FCC RF expo-
sure limits.
Antenna Installation:
For rear deck trunk installation, the antenna must be located at least the follow-
ing range away from rear seat passengers and bystanders in order to comply
with the FCC RF exposure requirements.
For roof top installation, the antenna must be placed in the center of the roof.
Congratulations!
Safety / Warning Information
Radiated frequency and Distance
VX-6000L ( B )
5.08 ft ( 1.55 m )
NOTICE
VX-6000V ( C )
4.85 ft ( 1.48 m )
VX-6000U ( D )
3.77 ft ( 1.15 m )