Introduction; Connections, Operating And Display Elements - Cameo TS 200 FC Manual De Usuario

INTRODUCTION

FRESNEL THEATER SPOT RGBALC
CLTS200FC
CONTROL FUNCTIONS
1-channel, 3-channel 1, 3-channel 2 HSI, 3-channel 3 CCT, 6-channel direct, 12-channel HSI, 14-channel direct DMX control
RDM-enabled
Master/slave mode
Stand-alone functions:
PROPERTIES
200 W RGBALC LED. Fresnel lens. Continuous manual zoom. Multifunctional strobe. Flicker-free projection. 3- and 5-pin DMX connectors.
Barn door and color filter frame included. 100–240 V AC operating voltage. 200 W power consumption.
The spotlight complies with the RDM standard (Remote Device Management). Remote device management allows the user to view the
status and configuration of RDM terminals via an RDM-enabled controller.
CONNECTIONS, CONTROL, AND DISPLAY ELEMENTS
7
1 POWER IN
Blue Power Twist power socket. Operating voltage: 100–240 V AC / 50–60 Hz.
POWER OUT
2
White Power Twist power socket for the power supply of additional CAMEO spotlights. Ensure that the total power consumption of all devic-
es connected to the device does not exceed the given ampere (A) value.
FUSE
3
Fuse holder for 5 x 20 mm micro fuses. IMPORTANT NOTE: Exclusively replace the fuse with a fuse of the same type and same values
(T3A/250 V). If a fuse trips repeatedly, please contact an authorized service center.
4 DMX IN
Male 3-pin and 5-pin XLR connectors to connect a DMX control device.
DMX OUT
5
Female 3-pin and 5-pin XLR connectors to transmit the DMX control signal.
BACKLIT LC DISPLAY
6
Display for the currently active mode and the menu items in the processing menu.
6
7
3
1
4
5
2
5