Technical Data - Milwaukee V 28 PD Instrucciones De Uso

TECHNICAL DATA

Drilling capacity in steel .....................................................................
Drilling capacity in wood ....................................................................
Drilling capacity in brick and tile .........................................................
Wood screws (without pre-drilling) .....................................................
No-load speed, 1st gear .....................................................................
No-load speed, 2nd gear ...................................................................
Torque
Low torque*1 ...................................................................................
High torque*1 ..................................................................................
Static jamming moment, 1st gear/2nd gear *1 ...............................
Battery voltage ...................................................................................
Drill opening range .............................................................................
Weight with battery .............................................................................
Typical A-weighted sound levels:
Sound pressure level (K = 3 dB(A)) .................................................
Sound power level (K = 3 dB(A)) .....................................................
Typical weighted acceleration in the hand-arm area .........................
Measured values determined according to EN 60 745.
*1 Measured according to Milwaukee norm N 877318
SAFETY INSTRUCTIONS
Please pay attention to the safety instructions in the attached leaflet!
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is
running.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Dust that arises when working on material containing asbestos or
stonework containing crystalline silicic acid is harmful to the health.
Please follow accident prevention regulations.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors offer to retrieve old batteries
to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System V 28 chargers for charging System V 28 battery
packs. Do not use battery packs from other systems.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
SPECIFIED CONDITIONS OF USE
The battery screwdriver is designed for drilling and screwdriving for
independent use away from mains supply.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
EN 60745, EN 55014-1, EN 55014-2, in accordance with the
regulations 98/37/EEC, 89/336/EEC
Manager Product Development
17 ENGLISH
Volker Siegle
................................16 mm
................................50 mm
................................20 mm
................................12 mm
.......................... 0-600 min
-1
........................ 0-1800 min
-1
................................32 Nm
................................75 Nm
...........................25/70 Nm
................................28 V
......................... 1,5-13 mm
...............................3,1 kg
................................91 dB (A)
..............................102 dB (A)
................................17 m/s
2
BATTERIES
Please take note of the specific information relating to Milwaukee
28V rechargeable batteries in the instruction manual for the charger.
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for
some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
MAINTENANCE
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden,
Germany.
SYMBOLS
Accessory - Not included in standard equipment,
available as an accessory.
Remove the battery pack before starting any work on
the machine.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste electrical
and electronic equipment and its implementation in
accordance with national law, electric tools that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.