Jensen PHOSE LINEAR Serie Manual Del Usario página 17

BT1613
NOTE: Never remove a USB device during
recording or music transfer. This may
damage the device or cause the system to
lock up. Do not switch modes or turn the
radio power or ignition off while recording.
Erasing Copied Files
You can erase copied files from a USB device
or SD/MMC card while the file is playing, or
after selecting the file in Number Search or
Navigation Search mode. To erase a file,
perform the following steps:
1. Press and hold the BAND button (5) to
activate the Erase function. The LCD will
display "ERASE 010".
2. Press the AUDIO CONTROL button (4) to
select Erase mode.
3. Turn the AUDIO CONTROL (3) and select
"Y" to erase (or select "N" to cancel the
erase function).
4. Press the AUDIO CONTROL button to
confirm. The file will stop playback (if
playing) and will be erased. When
finished, the system will display
"ERASE OK".
File Management
Music recorded or transferred using the
BT1613 will be stored in the default folders
listed below:
• MY_MP3: Transferred MP3 files.
• MY_WMA: Transferred WMA files.
Recorded/transferred music is stored in the
corresponding folder and given the following
naming convention: "XX0001.MP3", where XX
is the name of the source (i.e. SD0001.MP3).
15