Fellowes POWERSHRED 79Ci Manual De Instrucciones página 3

BASIC SHREDDING OPERATION
PAPER OR CD/CARD
1
Continuous operation:
Up to 20-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Plug in and put
Continuous operation beyond
disconnect power
20-minutes will trigger
switch in ON (I) position
30-minute cool down period.
ADvANCED PRODUCT FEATURES
Jam Proof System
Elimimates paper jams
and powers through
tough jobs.
JAM PROOF SYSTEM OPERATION*
Eliminates paper jams and powers through tough jobs.
Advanced Jam Prevention- Electronically
1
measures paper thickness to prevent paper jams:
If a misfeed
occurs:
*100% Jam Proof when used in accordance with user manual
SAFESENSE
®
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
1 2
Turn the shredder ON
Touch test area and
( ) to activate SafeSense look for the SafeSense
®
indicator to illuminate
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
2
Press ( ) ON to
activate (blue)
SafeSense Technology
®
Stops shredding immediately
when hands touch the paper
opening.
Up to RED: Too many
sheets have been inserted.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
All indicators light up and
shredder pauses for 3-6 seconds
TECHNOLOGY OPERATION
3
SafeSense is active and
®
working properly
®
3
4
or
Feed paper straight into To shred CDs or credit
paper entry and release cards rotate safety flap
into place
SilentShred™ Technology
Shreds without noisy
disruptions.
2
Remove several sheets until
indicator is below red.
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
• Saves energy in four ways: energy-efficient electronics, jam prevention,
standby mode and sleep mode.
4
• Sleep Mode shuts down shredder after 2 minutes of inactivity.
WHEN IN SLEEP MODE
1
If hand is held on SafeSense
®
area more than 3 seconds
shredder will shut off
In sleep mode
5 6
Hold card/CD at edge. When finished
Feed into center of shredding set
entry and release to OFF ( )
Energy Savings System
Optimal energy efficiency
100% of the time – in use
and out of use.
3
Continue 100% Jam
Proof Shredding
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
ENERGY SAVINGS SYSTEM
Optimal energy efficiency 100% of
the time – in use and out of use.
2
3
or
insert paper
To get out of sleep mode
touch control panel
3