D-Link DAP-3760 Guía De Instalación Rápida página 13

Connect the DAP-3760 to a Local Computer
If you are configuring the DAP-3760 locally (without connecting its
power injector to a wired LAN), connect a PC to the power injector's
Ethernet port using a Category 5 Ethernet cable.
1. Assign a static IP address to your PC which is in the same network
segment with the DAP-3760. As the default IP address of this unit is
192.168.0.50, you may choose from 192.168.0.1 to 192.168.0.254,
except 192.168.0.50.
2. Test the link status between your PC and the DAP-3760. Start a
command prompt and execute a continuous ping command "ping
192.168.0.50 –t". If ping to the wireless bridge is successful (as
shown below), open Internet browser and enter the bridge's IP
address in the address filed and press Enter.
13
Configuration
D-Link DAP-3760