Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Edge protector [6]
The edge protector [1-6] prevents the sanding pad
circumference from coming into contact with a sur-
face (e.g. when sanding along a wall or a window),
thus preventing back-kick of the machine, or ma-
chine damage.
6
1
DTS 400 REQ
WARNING
Risk of injury
Always secure the workpiece in such a manner
that it cannot move while being machined.
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Work in corners and on edges tends to subject
the tip to increased stress and results in in-
creased heat development. In such cases, work
with reduced contact pressure.
14
6
DTS 400 REQ
2
Working with the machine
– Hold the machine with one hand on the handle
[1-9].
For sanding, we recommend the following settings
for the adjusting wheel [1-3]:
Sanding work
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered surface
prior to paintwork
– Intermediate sanding of paintwork on sur-
faces
1
2
2
1
Adjusting
wheel set-
ting
5 - 6
Capítulos
Tabla de contenido
