Fein BF10-280E Instrucciones De Uso página 10

OBJ_BUCH-0000000009-001.book Page 10 Tuesday, June 29, 2010 9:22 AM
en
10
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the sanding arm and sand-
ing belt (figures 2 – 6).
Unscrew the fastening screw until the lid can
be removed. (figure 2)
Insert the sanding arm and fasten it with the
adjustment screw. (figure 3)
Mount the sanding belt around the rear drive
roller. (figure 4)
Now, mount the sanding belt around the
front guide roller. For this, push the sanding
arm toward the motor housing. (figure 5)
Mount the lid and tighten the fastening screw.
(figure 6)