Input Panel; External Speaker - Power Dynamics PDA Serie Manual De Instrucciones

Ocultar thumbs Ver también para PDA Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INPUT PANEL

1. Balanced input MIC combo XLR + 6.3mm
Jack)
2. Balanced Jack 6.35 mm line input
3. Effect Level input
4. Volume control for MIC
5. 5-Band EQ to adjust the sound of the
outputsignal
6. Line input for audio input source e.g. mixer,
CD player, etc
7. Channel 3 Source switch MP3 / RCA or
Bluetooth
8.
MP3 player display/panel
9. Volume control Channel 3.
10. DSP (Echo) signal level control
11. DSP (Echo) Mix and Time Parameters control
12. Master volume control
MP3 PLAYER :
A.
DISPLAY: Shows MP3 information
B.
USB/SD/Bluetooth SWITCH: Use switch for
playing from USB stick,SD card, Bluetooth
C. PLAY/PAUSE: Track play or pause mode
D. STOP: Track stop playing
E.
REPEAT: Select All, Folder, One or Random
HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE:
First turn on speaker, then press on "MODE" (F) till you see "AUX". Then use your mobile or computer to search a
Bluetooth device. When you find the "POWER DYNAMICS PLAYER" then connect. The password is: 0000

EXTERNAL SPEAKER

These speakerseries come with a 4-p speaker connector (17) for connection to an extra passive speaker. For optimized
performances we recommend you to use only the PDA passive speakers, which are especially designed for these
series. Minimum impedance is 8 Ohms.
13. Power Indication. This clear green indicator
will light when the amplifier is turned on.
14. Clip indication. These LED will light up when
amplifier are on max power. It can occur that
these LED will lit up now and then, this is not
a problem. But if it lights up continually you
need to adjust the volume down, otherwise
permanent damage to equipment might occur
15. Mains Power Connector / Fuse. This main
fuse secures the speaker against defects.
Replace this only with a fuse of same type
and value.
16. On/Off Switch: For switching the speaker on
and off. Always adjust the volume down to its
minimum before switching this speaker on.
17. Output for external passive speaker. NOTE:
Minimum impedance is 8 Ohm!
F.
PREV: Play previous track
G. NEXT: Play next track
H. USB CONNECTION
For connection of a USB stick with MP3 files
I.
SD CARD CONNECTION
For connection of a SD CARD with MP3 files
7 - 16
Tabla de contenido
loading

Este manual también es adecuado para:

Pda-12abt mp3Pda-15abt mp3

Tabla de contenido