Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8.1.2.
the TUBE LOCK must have an overlap of at least 3 mm. The pull pawl must have a
diameter of 10 mm.
8.1.3.
Before starting assembly of the actuator, prepare the following material for completion, equipments and tools.
◆
For fixing onto metal window frames: M5 threaded inserts (6 pieces), M5x12 flat headed metric screws
(6 pieces).
◆
For fixing onto wooden window frames: self threading screws for wood Ø4.5 (6 pieces).
◆
For fixing onto PVC window frames: self threading screws for metal Ø4.8 (6 pieces).
◆
Equipment and tools: measuring tape, pencil, drill/screwdriver, set of drill heads for metal, insert for
screwing in, electricians pliers, screwdrivers.
8.2. Installation
Improper use of the mechanisms may result in personal injury or damage to property.
A correct assembly of this device must be studied beforehand while processing the window or door, so that
mechanical processing on machining tools, such as milling and drilling, is still possible. Nevertheless, in case
of assembly on a finished door or window frame, an expert technician may be capable of applying the device
as long as he has the necessary equipment.
First of all the type of installation, recessed or external, must be chosen; in any case the material for
completion listed above must be prepared.
CAUTION: The pull pawl (not supplied) that mates with the adjustable metal hook of
Preparation of actuator for assembly
25
Tabla de contenido
