Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIgNAL
DANgER:
WARNINg:
CAUTION
CAUTION
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUThORIZED SERVICE CENTER for repair. When servicing,
use only identical replacement parts.
:
WARNINg
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields, or a full face shield when needed. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
PRODUCT SPECIFICATIONS
Motor ......................................................................18 V DC
Blade Length .............................................................. 18 in.
KNOW YOUR hEDgE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
SYMBOLS
MEANINg
Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SAVE ThESE INSTRUCTIONS
FEATURES
6 — English
WARNINg:
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator's manual. If you do not understand
the warnings and instructions in the operator's manual,
do not use this product. Call Ryobi customer service for
assistance.
Cutting Capacity........................................................ 3/8 in.
Net Weight ............................................................... 4.8 lbs.
gripZone
OVERMOLD
®
®
GripZone
overmold provides added user comfort.
gUARD
The guard helps to deflect chips or other debris away from
the operator's hands.
Tabla de contenido
