Operating Instructions
● BT Pairing Mode:
Press MODE button on the unit or the remote control until BT is selected.
1). Put the cell phone within 3 meters;
2). Activate the BT features on your cell phone so that the cell phone starts to search for the BT device. Please refer to the users'
manual for details
3). Select "SPLBOX" from the device found by the cell phone;
4). For some cell phones, the users have to key in the identification code "0000" and press ENTER key to pair the unit and cell
phone.
5). Press RETURN key on the cell phone to exit from the cell phone menu and play music with the unit when there is no barrier
between two cell phones within 10 meters. At this time, you can play music with the unit.
6). Shortly press PLAY/PAUSE button to play or pause music. Short press "
●LINE IN MODE:
Press MODE button on the unit or the remote control until LINE is selected. Play the music of the device connected to the LINE
input (4) on the rear panel.
● USB Mode:
1. After startup, press MODE to select "USB" and insert the USB device. The unit will automatically read and play the music in
the USB device.
2. Press "
" key shortly to pause or play the track.
3. Shortly press "
" key to skip to the previous track.
4. Shortly press "
" key to skip to the next track.
● SD Mode:
1. After startup, press MODE to select "SD" and insert the SD card. The unit will automatically read and play the music in the SD
card.
2. Press "
" key shortly to pause or play the music.
3. Shortly press "
" key to skip to the previous track.
4. Shortly press "
" key to skip to the next track.
Specifications
FREESOUND300
Max. power
300W
RMS power
150W
Woofer
8"/20cm
Mid-range/tweeter
3"/7,62cm
Freq. range
40Hz-18kHz
S/N ratio
≥70dB
Power supply
AC100-240V~ (±10%) 50/60Hz
Built-in battery
4.5A
Charging time
5.5 hours
Playing time
3-5 hours
Dimensions
290 x 280 x 538mm
Weight
8.85kg
The product design and specifications may be changed without prior notice!
Restrictions of Use
-
As the product contains a transmission/reception system of VHF signals, it is exclusively meant for professional use. The
user of the product is fully responsible for the use he makes of the product. The distributor cannot be held responsible for
an eventual misuse by the user of the product.
-
The symbol "!" that appears on the wireless transmitter, the packaging, the manual and on the product means that the
product is allowed for use only in some countries of the European Community (FR – BE – PT – D – NL – LU – GR – SP – RO).
" or "
" key to select the previous or next track.
3