Buckle Cleaning Process - Graco PD224074A Manual Del Propietário

7.4 Buckle Cleaning Process

PREVENT SERIOUS INJURY OR DEATH:
Buckle must be properly latched.
Periodically inspect and clean buckle to remove objects or debris
that could prevent latching.
1. Turn restraint over, push retainer through
crotch strap slot
2. To clean buckle - place in a cup of warm
water and gently agitate the buckle, press
the red button several times while in the
water . DO NOT SUBMERGE THE
HARNESS WEBBING. DO NOT USE
SOAPS or LUBRICANTS. DO NOT use
household detergents. Never lubricate
buckle.
3. Shake out excess water and allow to air
dry, harness webbing should be dry
before use
4. Repeat Step 2 and 3 as needed. Buckle
should fasten with a "click".
5. Re-attach buckle into the same slot from
Step 1.
Re-check harness for correct installation
before use.
.
.
41