Dmx Linking; Dmx Connection; Signal Wiring; Dmx Junction Box Wiring - Iluminarc ILUMIPANEL 24g2 IP Guía De Referencia Rápida

Ilumipanel 24g2 IP QRG

DMX Linking

DMX Connection

Signal Wiring

DMX Junction
Box Wiring
The Ilumipanel 24g2 IP will work with a DMX controller using a regular
DMX serial connection.
www.iluminarc.com.
This product provides a DMX 512 connection by using bare-ended
IP67-rated signal cable. This cable comes connected to the product. See
the User Manual to connect and configure for DMX operation.
To provide the signal, you have two options:
·
Connect the bare-ended IP67-rated signal cable from the product to
two IP67-rated signal connectors (DMX In and DMX Out).
·
Use an IP67-rated junction box. If so, make sure to use IP67-rated
conduit.
The signal cable must match or exceed the electrical characteristics
of the Belden 9841 cable for EIA RS-485 applications. You can also
use CAT 5, CAT 5e, or CAT 6.
Signal
Junction
In
Box
A DMX
1: Common (Shield)
2: Data – In (Black)
3: Data + In (White)
4: Data – Out (Green)
5: Data + Out (Red)
Conduit
4
Primer is available
Junction
Box
EN
from
Signal
Out