Maintenance And Cleaning; Ordering Replacement Parts - ALPHA-TOOLS SG 160 AK Manual De Instrucciones

Anleitung SG 160 AK SPK7

5. Maintenance and cleaning

To prolong the life of your tool you should always
clean it carefully after use. Do not use any solvents
for cleaning purposes.
Important!
To rule out risk of injury to persons and damage
to property, never clean the product in running
water and certainly never clean it under high
pressure.
6. Accessories (Fig. 3)
1 Grinding head
2 Attachments for the grinding head
3 Whetstone
4 Clamping spindle for grinding and cutting-off
wheels
5 Cutting-off wheel
6 Sanding/grinding paper
7 Holder for felt polishing disk
8 Felt polishing disks
9 Grinding pins
10 Sleeve
11 Drill chuck key
12 Engraving pin
Cut-off wheels: For cutting metal and plastic.
Mount the cut-off wheel on the
clamping spindle.
Engraving pins: For engraving decorations and
identification marks in glass and
metal
Grinding pins: Available in a variety of grinding
head shapes. For grinding and
deburring metal and plastic.
Sanding disk: For sanding and smoothing
wood and plastic.
Polishing felt: For polishing brass, tin, copper,
etc. Can also be used in
conjunction with polishing paste.
Whetstone: For sharpening tools.
16.08.2006 13:04 Uhr Seite 7

Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB
7