Trouble Shooting - Kamikaze KV 100 Manual De Uso

ElEctrical PolE PrunEr
21. trouble shooting and repair
Have your power tool serviced by a qualified repair person using only identical
parts for replacement. This will ensure the safety of the power tool.
Issue
Incorrect connection
Pruners
doesn't work
Blade becomes
hot
Insufficient lubrication
Bad cutting
surface
Incorrect usage of the
Battery charge is low
Battery not correctly
Charger not correctly
Can't charging,
red LED flash
Battery poles are dirty
Possible cause
Switch fail
Blunt blade
Damaged blade
Friction force added
Blade is dirty
Blunt blade
pruner
insert in the charger
connected to power
Battery failure
Charger fail
Solution
Check correct wire connection with the
tool and the battery. Check the switch to
be in ON position.
Send shear to service center for repairing
Sharp or replace blade
Sharp or replace blade
Lubricate the blade
Lubricate the blade
Clean blade
Sharp or replace blade
Read instruction carefully
Charge the battery
Re-insert the battery to charger
Re-connect the charger
Clean the poles
Replace battery
Replace charger
79
www.kamikazevolpi.com