Orbegozo AH 3050 Manual De Instrucciones página 10

AH 3050/AH 3150/AH 3160
• To put it into operation, put the regulator in position for
maximum 20 minutes to obtain a rapid heating and then
switch to the low position. The position of maximum
heat is used only for the rapid warming and never more
than 20 minutes.
• Do not fold or bend the electric cord and do not use your
blanket when it is folded up, rolled up or bent on itself.
• Wear it over a garment.
• Do not cut or pierce the heating blanket. Do not make
holes using pins or dull instruments. Do not disassemble
it
• Do not wash or dry clean the inner part of the heating
blanket.
OPERATION
The heating pad can smell plastic during the first use but it will disappear after a short period of time.
ON/OFF
To use the device, first connect the controller to the pad and then plug the controller into a power outlet.
Switch on:
Select the highest temperature level (level 6) a short period of time before use, so the pad will warm up
faster. Select the level of temperature control 1 to 6. If you use the pad for a few hours select an average
temperature (level 3).
Shutdown:
Select the level 0 on the remote to turn off the heating pad and unplug from the wall outlet.
TEMPERATURE LEVELS
Level 0: off.
Level 1-2: minimum heat.
Level 3-4: medium heat.
Level 5-6: maximum heat.
AUTO STOP
The heating pad is turned off automatically after 90 minutes. It will appear "A" in the LED indicator on the
controller.
To reuse the pad, first select the 0 position on the knob and after about 5 seconds select the desired level to
restart the pad.
If you do not want to continue using the pad after auto stop, select level 0 in the controller and unplug it
from the outlet.
10