Assembly - Pinnacle Remington REM-80V-LPC-O Manual Del Usuario Y Instrucciones De Operacion

11 mm Screws (6)
Missing Parts? Please Call 866-676-1989 For Assistance
Attaching The Upper Housing
• Tools Required: Phillips Screwdriver
1. Slide Upper Housing straight up and off of
lower housing and remove all packed items
from inside the heater. (See Figure 4)
2. Remove all packaging protecting the heater
during shipping. Retain caps for covering the
inlet connector and regulator hose fro storage.
3. Attach three (3) screws to the bottom row of
holes in the lower housing. (See Figure 5)
Figure 4
© 2017, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING,
CONNECTED TO A POWER SOURCE, OR WHILE
CONNECTED TO A FUEL SOURCE
Assembly Instructions
What's In The Box
Regulator (1)
4. Slide upper housing over lower housing,
NOTE: Save carton and packaging material
for later storage.
Figure 5
5
lining up the four remaining screw holes.
Insert three (3) screws and tighten securely.
(See Figure 5)
Convection Heater User's Manual
Upper Housing (1)