System Setup; Selecting A Preset - Amate Audio Joker Serie Manual De Usuario

Joker Active systems

4. SYSTEM SETUP

Thanks to their internal microcontroller and DSP System, the Joker Active cabinets
can be configured for different applications. This section explains all the possible
configurations.
The LCD and keypad on the cabinet's back panel are used for the setup.
IMPORTANT: To enter the Menu, the keypad must be unlocked by
simultaneously pressing the keys MENU and SELECT
4.1 Startup and Main Screen
At startup the LCD screen will show the Amate Audio and Joker logo. After a few
seconds, the main screen shown in Fig. 27 will be displayed:
A
B
A: Current preset
B: Input and Output levels
C: Gain level
D: Temperature of the power stage
E: Special features
- Eco: when Ecomode is enabled
- ALC: when Adaptive Loudness Compensation is enabled
- Lock: shows when the keypad is locked
- Polarity: positive (Pol+) or negative (Pol-) (only in Subwoofers)

4.2 Selecting a Preset

To change the Preset, follow these steps:
1) If the keypad is locked, unlock it with
MENU + SELECT
2) Press PRESET once. You will enter the
Preset menu, and the current preset will be
shown
3) Press PRESET to browse through the available presets of the system. When you
find the desired one, press SELECT to set it as the current preset. You will be
redirected to the main screen
31
FLAT
Fig. 27: Main screen display
C
0.0dB
30
D
Eco
ALC
Lock
E
FLAT
July 2016
Amate Audio