Amate Audio Joker Serie Manual De Usuario página 16

Joker Active systems
ATTENTION: When any of the subwoofers from Joker series is used in conjunction
with the JK26A+, JK10A, JK12A, JK15NA, JK10MA, JK12MA, JK46A in XOVER or
XPOLE preset, the subwoofer must operate in positive polarity.
When any of the subwoofers from Joker series is used in conjunction with the
JK26A+, JK10A, JK12A, JK15NA, JK10MA, JK12MA, JK46A in FLAT, NEARFIELD,
NEARDFIELD+, LONGTHROW, SPEECH, MONITOR, PRESENCE presets, the
subwoofer must operate in negative polarity.
2. CONNECTIONS
2.1. Overview
The power and audio connections are located on the unique Joker back panel, shown
in Fig. 1. The different parts of the panel are explained in detail in the following
sections of the manual.
Control Panel
A) LCD: Displays basic information about the DSP Status. The main screen shows
the following information.
For FULL-RANGE Systems
 Current preset
 Input Level
 Output Level LF Channel
 Output Level HF Channel
 Amplifier temperature
 ALC mode enabled/disabled
 ECO mode enabled/disabled
 Keypad locked/unlocked
For SUBWOOFER Systems
 Current Preset
16
POLE MOUNT use: When any of the subwoofers from
Joker series is used in conjunction with the JK46A in
XOVER preset and in pole-mount configuration, a
delay of 2.9ms must be set on JK46A*.
*For a 70cm pole bar
July 2016
Amate Audio