Blumfeldt 10031445 Manual Del Usuario página 20

EN
20
OPERATION
Connect the power cable to a 13 amp supply which is located in a safe, dry
area.
• The switch on the heater is used to control the
Heater.
• „I": the heater will be in standby mode. The standby
light turn orange.
• „0": Turn off the heater.
Control panel
• When flashes, the heater is locking.
• Touch again to unlock and its light will become often bright.
• Touch . The heater will operate at 750 W.
• Touch again. The heater will operate at 1500 W.
• When the heater is working, touch
hours.
• When the heater is working and without timer (
the heater will turn off after 12 hours.
Power switch
. The heater will turn off after 2
light is not working),