Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Troubleshooting
(Continued)
m
• Sometimes
playback
is interrupted
at the connecting
section
between
two scenes. This is not a malfunction.
• Select [PLAYBACK
MPG FILE] then search the video on the index
screen.
(Video files that have damaged
management
information
can be
played back.)
• Cancel group display and date search functions.
• Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
FOR IMAGE]. (Files on other media are not displayed.)
• Check the remaining battery pack charge.
(When the battery pack is fully charged, the lamp does not flash.)
• When recharging
in either a hot or cold environment,
ensure that
battery is being charged within the permitted temperature
range.
(If the battery pack is being recharged outside the permitted
temperature
range, recharging may stop to protect the battery pack.)
• When
connecting
to the HDMI cable, the image or sound
may not appear
on the TV properly
depending
on the TV
connected.
In such cases,
perform
the following
operations.
1) Disconnect
the HDMI cable and connect
it again.
2) Turn off and on the camcorder
again.
• TVs may operate differently depending
on the specifications,
even if they are HDMI-CEC compliant.
Therefore, the HDMI-CEC
functions of the camcorder
cannot be guaranteed
to operate in
combination
with all the TVs. In such cases, set [HDMI CONTROL]
to [OFF].
• Refer to "Q&A", "Latest Information", "Download
Information",
etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser
software.
If a malfunction
occurs in the HDD
Perform [FORMAT HDD]. (All data is deleted.)
2: If this does not solve the problem, contact the JVC customer service for repairs.
m To reset the camcorder when it does not operate normally
Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
Execute [FACTORY PRESET].
38 EN
Capítulos
Tabla de contenido
