Software Installation - Ovislink EVO-W54APv2 Guía Rápida De Instalación

Rear Panel:
The rear panel contains the following features. (Viewed from left to right:)
1. R-SMA connector to screw the supplied 5dBi antenna.
2. One LAN 10/100Mbps RJ45 port for connecting the access point to the local
computer or switch.
3. AC power socket: only use the power adapter supplied with the
Evo-W54APv2 Access Point, use of a different adapter may result in product
damage.
4. Factory Default Reset button
How to Reset to factory default settings :
1. Turn on the access point power.
2. Press and hold the Reset button for 10 seconds.
3. Release the Reset button and wait for the access point to reboot.
Before the software configuration:
1. Screw the antenna to the R-SMA connector.
2. Use the supplied Ethernet cable to connect your computer to the Access Point.
3. Plug the Power supply to the Power socket and plug the other side to the
electrical socket (wall or UPS).
4. Wait until the LED M1 flashes. Now, you can access to the website of the
access point.

SOFTWARE INSTALLATION:

Access to the web page:
1. Please, open your web-browser and enter the
following address :
http://192.168.1.1 and press Enter.
2. To access to the web page, you've a login
window that appears. Please, enter
the default username and password :
User: admin
Password: admin
2