Hardware Installation; Manual Configuration - Ovislink Air Live WT-2000AP Manual Del Usuario

Hardware Installation

1. Setup LAN connection: connect an Ethernet cable from your
computer's Ethernet port to one of the LAN ports of this product.
2. Configure your PC:
Make sure your local PC(s) has wireless network adapter installed

Manual Configuration

You can manually configure this Access Point via a wireless or wired
connection.
1
Wireless
1. For wireless station, make sure your computer has
associated with this Access Point.
2. Skip to step 2
Wired
1. Start your computer. Connect an Ethernet cable between your
computer and the Wireless Access Point.
2. Make sure your wired station is set to the same subnet mask
as the Wireless Access Point, i.e. 192.168.1.10
Turbo-G Wireless AP
WT-2000AP
English
3
3