Bushnell NatureView Cam Manual De Instrucciones página 30

start playing, press again to stop.
• Press the UP key for the previous photo or video
and the DOWN key for the next one. When viewing
images, the total number of all images in the SD card
and the index of the displaying image are shown in
the center of LCD and at the bottom of the video
monitor respectively.
• Press the OK key to return to live preview state
(SETUP mode) when playback is finished.
Reviewing Images by Connecting the Camera
to a Computer
You can always unmount the entire camera from the tree and connect its
USB port to a computer-it will be recognized as a "removable disk", without
the need to install any drivers or software. When using a PC (or Mac*) to view
photos (or video clips*), first connect the device to the computer with the
supplied USB cable. Then use commercial software with an image browser
feature, or an image browser included with the PC's operating system to
view images saved on the SD card in the folder \DCIM\100EK113. Each
new image or video will be numbered incrementally in order of the time it was
captured. For example, you will see file names such as "EK0001.JPG" or
"EK0001.AVI", etc. Through the file format suffix you can distinguish whether
the file is a still photo (with suffix .JPG) or a video (with suffix .AVI).
*video files may require additional software for viewing on a Mac.
The NatureView Cam supports 3 kinds of file system formats, FAT12,
FAT16, and FAT32. The default value is FAT16 to save photos and videos.
Here are some related notes:
• You don't need to be concerned about the file system format of the
NatureView Cam unless your equipment has problems reading
the SD card. If this happens, please format the SD card with the
NatureView Cam or in your computer first and then insert the card
into your NatureView Cam and try again.
• The default file system format of the NatureView Cam is FAT16,
which most computers can read. If you format an SD card for the
NatureView Cam in your computer, you should choose the file system
format FAT16. Normally FAT16 is recommended unless you have
another image viewer that uses FAT12 or FAT32 format.
30
Cable from
"A/V Out"