Bushnell NatureView Cam Manual De Instrucciones página 21

Parameter
Video
Length (only
affects video
clips)
Interval
Settings
(Bold=default)
10S (second)
default, with
60S to5S
possible range
10S (second)
default,
with a 60M
(minute) to1S
(second) range
of settings
available.
(60M-1M
are set in
one minute
increments,
59S-1S are set
in one second
increments)
Description
Sets length per captured video
clip. Settings begin with 10
second default when parameter is
first selected. After stepping down
to 5S, video length settings start
over at 60S.
Selects the length of time that the
camera will "wait" until it responds
to any additional triggers from the
PIR after an animal is first detected
and remains within the sensor's
range. During this user set "ignore
triggers" interval, the camera will
not capture photos/videos. This
prevents the card from filling up
with too many redundant images.
Settings begin with 10 second
default when parameter is first
selected. Note: after setting down
past "1S", settings start over at "60M".
21