Radio Operation - Sangean ProTravel PT 80 Instrucciones De Manejo

02 Yacht Boy 80, GB 19.08.2003 14:52 Uhr
OPERATION
Switching on and off
1 ON/OFF SLEEP
Press »
– You will hear the radio station last selected.
2 ON/OFF SLEEP
Press »
– Display: Local time 1 or 2.

Radio operation

Selecting the frequency band
1
Select the desired waveband (FM, SW, MW or LW) by pressing
BAND
» «.
2
If you select short wave, you can select the frequency band by pressing
SW SELECT
» «.
– Display: the SW frequency bands from »
Calling up stored radio stations
1
Select the station using the numerical buttons »
number.
– Display: the frequency and the preset number, for example »
2
To call up preset numbers 10 to 18 in the SW band, press »
CLOCK 1/2
« to switch to the second memory level.
– Display: » «.
M 2
Notes:
For FM reception pull out the telescopic antenna and tilt it until you
receive the best signal. For short wave reception (SW) the antenna
should be upright. For medium wave and long wave reception, align
the antenna by turning the device.
Checking stored radio stations
You can call up all the stored radio stations in a wave band automatically
for seven seconds (memory scan).
1
With the radio playing, press »
– The device starts with the current preset station and soon changes to
the next one.
– When you reach the station you want, press »
the function.
Swapping preset positions
1
Enter the preset station to swap using the numerical buttons »
2 MEMO AM/PM
Press »
– Display: the selected preset position flashes.
3
Enter the new preset position using the numerical buttons »
– A signal sounds and the preset positions are exchanged.
Seite 31
__________________________________________
« to switch on the device.
« to switch off the device.
« to »
120 m
1 ... 9
0 M. SCAN
«.
0 M. SCAN
«.
«.
11 m
« for the preset
«.
SW PAGE
« to stop
1 ... 9
«.
1 ... 9
«.
11