Jensen VM9214 Instrucciones De Operación página 60

VM9214
Problem
Incorrect play- Message is longer than
back message LCD can display
displayed
Error Messages
Message
Displayed
Loading Disc is being read
No Disc Disc is dirty
Disc is upside down
Disc not present in loading
compartment
Bad Disc Disc is dirty
Disc is upside down
Unknown Disc format is not compatible
disc with this unit
Region Error DVD is not compatible with
region code of unit
Error Illegal mechanism operation
Care and Maintenance
1. Use only a clean silicone cloth and neutral detergent to clean the front
panel or monitor. A rough cloth and non-neutral detergent (such as alco-
hol) may result in scratching or discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a protective circuit
automatically stops play of the disc. If this occurs, allow the unit to cool
before operating the player again.
4. Never insert anything other than a 5" (12 cm) compact disc into the player
as the mechanism can be damaged by foreign objects.
5. Do not attempt to use a 3" (8 cm) CD-Single disc in this unit, either with or
without an adaptor, as damage to the player and/or disc may occur. Such
damage is not covered by the Warranty on this product.
Table 7: Troubleshooting
Cause
Table 8: Error Messages
Cause
57
Corrective Action
Corrective Action
Clean disc with soft cloth
Insert disc with label side up
Insert disc
Clean disc with soft cloth
Insert disc with label side up
Press EJECT key for 5 seconds to
reset loading mechanism