Jensen VM9214 Instrucciones De Operación página 54

VM9214
Pairing the Bluetooth System with Your Mobile
Phone and Head Unit
1. Press the button (7) to initiate the pairing process. Keep the mobile
phone within 2 meters of the head unit when pairing. (To terminate the
pairing process, press the
2. Select the Bluetooth setup option on the mobile phone to be paired
(please refer to the phone's instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some phones require a "pass key" or pairing code to connect. If
your phone requires a pass key or pairing code, you will need to enter
this number in the Pairing Code field under the Bluetooth SETUP menu.
The default pairing code for many phones is "0000". The default code for
the VM9214 is "1234". See "Bluetooth Sub-menu Features" on page 22
for instructions on entering the pairing code.
3. Select "VM9214" from the pairing list on the mobile phone.
• If pairing is successful, the TFT will display the paired mobile phone
model number or name (as specified in your phone's Bluetooth Setup
menu).
• If pairing fails, "Phone Pairing Fail" is displayed at the bottom of the
screen.
Reconnecting
Once the Bluetooth device has been paired, you can touch the connect
button (9) to reconnect.
NOTE: You can only connect to a phone using the buttons on the on-
screen Phone interface.
Each time the button is pressed, the head unit will automatically reconnect
with the mobile phone once (only if the mobile phone was previously paired
with the head unit).
Managing Incoming Calls
When connected to a Bluetooth phone, the unit will mute audio output, pause
CD play, and change to the Bluetooth screen when a call is received. An
incoming phone number will appear at the top of the screen.
Answering an Incoming Call
To answer the call, touch the
button again.)
button (11).
51