Memory Recall - smartheart 51-1490 Manual De Instrucciones

MEMORY FUNCTION
Recalling Measurements in Memory
Select the desired user, A or B, before memory
review
the measurement result was stored.
This monitor stores and recalls up to 250 readings per
user. These measurements can be shared with your
physician or trained healthcare professional.
1. When the unit is OFF, press and release the M button
to select the memory bank for review. Then press the
AB button to toggle between user A or B.
2. The unit will first display the average of the last three
measurements, Fig 1. If there are less than 3 readings
in memory, the most recent reading will display.
3. Press the M button again to begin scrolling through
the saved measurements. Measurements will appear
on the display from most current to oldest; the
memory number will at the top left of the display
screen.
4. All results for a given measurement will display,
including measurement results, pulse rate,
Hypertension Indicator and Irregular Heartbeat alert
(if applicable). The date/time stamp will alternate on
the bottom left of the display, Fig 2.
5. When the number of readings exceeds 250 , the
oldest data will be replaced with the new record.
6. Press START•STOP to turn the monitor off at any
time during review of the stored measurements.
22 • ENGLISH
. The user icon displayed represents the memory bank where
Fig. 1
Fig. 2