Memory Functions; Recalling Measurements In Memory - smartheart 01-523 Serie Manual De La Instrucción

MEMORY FUNCTIONS

This monitor stores and recalls up to 60 readings per
user. These measurements can be shared with your
physician or trained healthcare professional.
Select the desired user, 1 or 2, for review.
The user icon displayed represents the memory
bank where the measurement results are stored.
1. When the monitor is OFF, press and hold
the MEM button. The display will illuminate
and the current user, 1 or 2, will flash on
the display.
2. Press MEM again to toggle between user 1 or 2.
3. Press SET to confirm the selection.
Proceed to the measurement recall steps below.

Recalling Measurements in Memory

1. Press the MEM button; the display will show the
average of the last three measurements in that
memory bank, Fig 1.
2. Press the MEM button again
to begin scrolling through
the saved measurements.
Measurements will appear on
the display from most current
to oldest; the date / time
shown will indicate when the
measurement was taken.
24 • ENGLISH
Fig. 1