Start The Machine; Stop The Machine; Adjust The Discharge Chute; Adjust The Chute Deflector - GreenWorks Pro 2602502 Manual Del Operador

7.2

START THE MACHINE

2
3
1. While holding the safety switch button (3), pull the
bail lever (2) to start the machine.
Lower the scraper to the ground to remove the snow.
WARNING
Keep bystanders a safe distance from the machine.
WARNING
Examine the work area. Remove all stones, sticks,
wire, bones, and other debris that can ricochet
because of the rotating impeller.
7.3

STOP THE MACHINE

1. Release the bail lever (2) to stop the machine.
WARNING
Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off
and on.
WARNING
Pull the plug after you complete the work.
NOTE
English
7.4

ADJUST THE DISCHARGE CHUTE

You can adjust the discharge chute 180° to change the
snow direction.
1. Turn the grip handle (4) left to move the discharge
chute (7) to the left.
2. Turn the grip handle (4) right to move the discharge
chute (7) to the right.
7.5

ADJUST THE CHUTE DEFLECTOR

You can adjust the chute deflector up and down to
change the throwing distance of the snow.
9
7
4
22
6
EN