Led Headlights; Operation Tips; Maintenance; General Maintenance - GreenWorks Pro 2602502 Manual Del Operador

EN
Release the bail switch before you adjust the chute
deflector.
Do not push the deflector so far forward that a gap
shows between the deflector and the chute.
1. Push and hold the trigger (22) on the chute deflector
(6).
2. Move the chute deflector (6) up to increase the
snow distance.
3. Move the chute deflector (6) down to decrease the
snow distance.
7.6

LED HEADLIGHTS

2
3
8
Turning the headlights on：
1. Push and hold the safety switch button (3).
2. Pull the bail lever (2) in the direction of the handle
bar to turn the headlights (8) on.
Turning the headlights off：
3. Release the bail lever (2).
7.7

OPERATION TIPS

• If it is possible, clear the snow with the direction of
the wind.
• In strong winds, lower the chute deflector to direct
the snow to the ground.
•
When you complete the work, let the machine
operate for a while to prevent ice formation in the
discharge chute.
WARNING
WARNING
English
• If the snow is deeper than 8", decrease the speed
and let the machine work at its own rhythm.
• Do not use the scraper to remove compact snow
and ice.
8

MAINTENANCE

Disconnect the extension cord before maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
8.1

GENERAL MAINTENANCE

• Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a
brush.
8.2

REPLACE THE SCRAPER

17
9
Use only approved replacement scrapers.
Wear heavy gloves or wind cloth around the blade
when you touch the blade.
10
WARNING
CAUTION
CAUTION
CAUTION
WARNING
WARNING